We will be closed November 26 to 29 for Thanksgiving.

248-887-1037
  1. Home
  2. Molding Library

2,068 molding profiles. One of them is probably yours.

Every knife we've had made stays in our library and is never reground to another shape. Find yours by type, width or knife number, open it, and print it actual size to hold against your trim.

Showing 48 of 2,068 profiles. Tap one to open it and print it actual size.

8-5-08-14Nosing / Transitions / Thresholds, 1.063 × 1.563 in3-8-01-01/4 Round / 1/2 Round, 1 × 2 in3-7-11-0 + 3-6-10-0Corner Mold, 1 × 1.438 in3-3-08-0Panel, 0.375 × 2.75 in6-6-05-1 + 8-4-12-0Casing, 0.75 × 3.875 in2-9-01-10Crown / Cove, 0.75 × 6 in24-1-12-0Base, 0.625 × 5.75 in27-6-09-1Base / Casing, 0.75 × 3.75 in26-2-08-1 + 3-9-02-0Hand Rail, 1.438 × 5.25 in23-4-13-1 x2Chair Rail, 1.438 × 3.5 in7-7-10-3Specialty Moldings, 1 × 4 in3-10-10-3BFluted / Beaded, 0.75 × 5 in8-8-02-2Picture Frame / Frames, 1.375 × 3.375 in7-3-10-2Mullion, 0.75 × 5.5 in6-6-05-1Tongue & Groove Paneling, 0.75 × 7.25 in25-1-16-0Back Band, 1.5 × 1.5 in3-2-10-1 + 3-8-07-0Picture Mold, 0.75 × 1.75 in7-9-04-16Mantel, 1.5 × 6.5 in5-7-14-0Plinth (Block), 1 × 7.5 in3-6-10-0 + 8-7-04-2Bar Rail, 1.5 × 7.5 in4-3-04-1BBrick Mold / Sill, 1 × 2 in8-5-08-0Nosing / Transitions / Thresholds, 0.875 × 1.563 in3-9-03-01/4 Round / 1/2 Round, 0.75 × 1.5 in3-3-11-0Corner Mold, 1.25 × 1.25 in6-2-05-1Panel, 1.25 × 2.75 in6-8-05-2 + 3-6-12-0Casing, 0.75 × 5.25 in22-6-02-11Crown / Cove, 1 × 6.75 in10-8-08-0Base, 0.813 × 5.25 in5-9-13-1Base / Casing, 0.75 × 7 in3-6-02-15 + 3-5-06-15Hand Rail, 2.25 × 6 in6-3-07-2Chair Rail, 0.75 × 3.5 in10-10-05-2Specialty Moldings, 0.75 × 4 in23-10-05-1 + 23-10-06-1Fluted / Beaded, 1.063 × 5 in27-1-01-2BPicture Frame / Frames, 1.063 × 3.313 in7-3-10-2GMullion, 0.75 × 8.25 in8-4-18-0Tongue & Groove Paneling, 0.75 × 5.125 in5-9-01-0BBack Band, 1.5 × 1.625 in5-8-02-0Picture Mold, 0.75 × 1.75 in23-9-03-5Mantel, 2.063 × 6.5 in5-3-09-0DPlinth (Block), 1.5 × 7.5 in8-7-03-2 + 3-2-08-0Bar Rail, 1.25 × 4 in8-8-08-0Brick Mold / Sill, 1.25 × 2 in3-1-08-0Nosing / Transitions / Thresholds, 1 × 6 in4-10-10-0Panel, 1.5 × 2.625 in26-7-04-2 + 23-2-05-0 x2Casing, 0.813 × 5.25 in22-7-01-11Crown / Cove, 1 × 6.875 in27-6-06-0Base, 0.75 × 5.5 in24-10-05-0Base / Casing, 0.688 × 5 in

Good to know

How molding orders work

Many domestic or exotic hardwoods

Moldings are made in-house in whichever stocked hardwood you need, domestic or exotic. Please call about running moldings on material that you supply.

Setup per knife

We charge a molding setup for each knife used. Some profiles take more than one knife. Dimensional material has no setup charge.

Other sizes

Many of our knives can run on thicker, thinner, wider or narrower boards than shown. Call and we'll check whether yours will work.

Printing actual size

Open a profile and choose Print actual size. In your print settings, set scaling to 100% or Actual size, not Fit to page.