We will be closed November 26 to 29 for Thanksgiving.

248-887-1037
  1. Home
  2. Molding Library

2,068 molding profiles. One of them is probably yours.

Every knife we've had made stays in our library and is never reground to another shape. Find yours by type, width or knife number, open it, and print it actual size to hold against your trim.

Showing 48 of 2,068 profiles. Tap one to open it and print it actual size.

5-8-10-0Back Band, 1.688 × 1.75 in9-1-10-1BPicture Mold, 0.75 × 1.875 in7-8-04-16Mantel, 1.75 × 6 in6-5-11-1BPlinth (Block), 1.125 × 8 in3-5-05-16 + 3-6-08-16Bar Rail, 1.75 × 4.5 in4-1-04-1Brick Mold / Sill, 1.25 × 2.5 inTRANSITION1Nosing / Transitions / Thresholds, 0.875 × 3.5 in3-7-01-18 + 3-7-02-181/4 Round / 1/2 Round, 1.5 × 3 in5-9-16-0Corner Mold, 1.75 × 1.75 in10-10-04-3Panel, 1.688 × 3 in9-6-15-1 + 9-5-13-0Casing, 0.75 × 5 in22-4-06-9Crown / Cove, 0.75 × 5.25 in10-3-03-0BBase, 0.75 × 5.25 in24-2-02-1Base / Casing, 0.813 × 5.438 in3-9-06-3 + 3-3-02-3Hand Rail, 1.5 × 5.5 in10-2-09-0BChair Rail, 1.25 × 2.938 in8-6-14-2BSpecialty Moldings, 1.375 × 4.183 in4-9-12-0 + 3-7-15-25Fluted / Beaded, 0.75 × 6 in6-10-08-5Picture Frame / Frames, 1.75 × 3.5 in6-8-03-0BMullion, 0.75 × 7.625 in6-3-01-0Tongue & Groove Paneling, 0.75 × 5.25 in10-2-04-0BBack Band, 1.063 × 1.625 in25-10-10-1 X2Picture Mold, 0.813 × 1.813 in27-7-06-16 + 23-7-04-0Mantel, 1.5 × 5.75 in9-3-01-0CPlinth (Block), 1.375 × 7.938 in5-2-03-5 + 6-2-03-5Bar Rail, 1.5 × 3 in8-8-10-1Brick Mold / Sill, 1 × 2.063 inTRANSITION2Nosing / Transitions / Thresholds, 0.5 × 2.5 in3-6-02-11/4 Round / 1/2 Round, 1.25 × 2.5 in3-5-19-0BCorner Mold, 1.5 × 1.5 in5-9-14-0Panel, 1.25 × 2.875 in26-7-02-1Casing, 0.75 × 5 in2-7-07-9Crown / Cove, 1 × 5.5 in27-5-06-1Base, 1.125 × 8 in24-2-03-2Base / Casing, 0.813 × 5.438 in3-9-06-0 + 3-1-14-0Hand Rail, 1.5 × 5.5 in6-3-05-2Chair Rail, 0.75 × 3.5 in5-4-05-0Specialty Moldings, 1.063 × 4.063 in3-4-13-0 + 5-3-19-0Fluted / Beaded, 0.75 × 5.25 in27-9-01-3Picture Frame / Frames, 2.25 × 3.438 in10-2-19-1 + 8-3-11-0Mullion, 0.75 × 6 in26-5-14-0ATongue & Groove Paneling, 0.813 × 5.188 in5-7-11-0DBack Band, 1.25 × 1.5 in25-10-03-1Picture Mold, 0.75 × 1.813 in2-5-06-5BMantel, 1.5 × 5.75 in9-3-01-0BPlinth (Block), 0.938 × 1.188 in7-7-09-0 + 7-7-08-3Bar Rail, 1.5 × 5 in8-7-08-1Brick Mold / Sill, 1.125 × 2 in

Good to know

How molding orders work

Many domestic or exotic hardwoods

Moldings are made in-house in whichever stocked hardwood you need, domestic or exotic. Please call about running moldings on material that you supply.

Setup per knife

We charge a molding setup for each knife used. Some profiles take more than one knife. Dimensional material has no setup charge.

Other sizes

Many of our knives can run on thicker, thinner, wider or narrower boards than shown. Call and we'll check whether yours will work.

Printing actual size

Open a profile and choose Print actual size. In your print settings, set scaling to 100% or Actual size, not Fit to page.