We will be closed November 26 to 29 for Thanksgiving.

248-887-1037
  1. Home
  2. Molding Library

2,068 molding profiles. One of them is probably yours.

Every knife we've had made stays in our library and is never reground to another shape. Find yours by type, width or knife number, open it, and print it actual size to hold against your trim.

Showing 48 of 2,068 profiles. Tap one to open it and print it actual size.

0-9-05-8Panel, 2 × 4 in6-5-03-2Casing, 0.75 × 5.125 in2-7-01-8Crown / Cove, 0.75 × 5 in25-4-05-1Base, 0.75 × 5.125 in4-2-10-1Base / Casing, 0.75 × 5.75 in7-2-01-1C + 3-8-10-0Hand Rail, 1 × 6 in3-9-07-1Chair Rail, 0.5 × 2.375 in2-10-05-9Specialty Moldings, 1.5 × 5 in3-2-06-0BFluted / Beaded, 0.75 × 4 in7-10-05-14Picture Frame / Frames, 1.75 × 5 in5-10-02-1BMullion, 0.75 × 5 inTONGUETongue & Groove Paneling, 0.75 × 3.625 in1-3-01-6Back Band, 1.125 × 2 in9-2-01-1 + 3-1-06-0Picture Mold, 0.75 × 3 in22-7-07-9Mantel, 1.625 × 5.25 in7-6-06-2CPlinth (Block), 1.25 × 7 in27-8-08-3 + 27-8-09-3Bar Rail, 1.75 × 4.5 in8-9-08-2Brick Mold / Sill, 1.183 × 3.563 inTHREASHOLDNosing / Transitions / Thresholds, 0.75 × 6 in23-10-09-2 + 23-10-10-2_191/4 Round / 1/2 Round, 3 × 4.5 in10-6-10-1Corner Mold, 1.063 × 2.125 in7-9-05-3BPanel, 1.75 × 3.25 in23-3-05-0 x4Casing, 0.938 × 5 in1-1-04-9Crown / Cove, 0.75 × 5.125 in4-1-07-0Base, 0.75 × 5.25 in10-8-06-1BBase / Casing, 0.75 × 7 in3-2-05-0 + 3-5-10-0Hand Rail, 1.625 × 5 in27-6-08-4Chair Rail, 0.688 × 5.125 in8-8-05-2 + 8-8-04-1Specialty Moldings, 1.5 × 6 in3-4-04-2Fluted / Beaded, 0.75 × 5.25 in7-10-04-16 + 7-4-02-1Picture Frame / Frames, 2.75 × 5.75 in4-6-07-2DMullion, 0.688 × 5 in3-4-09-0Tongue & Groove Paneling, 0.625 × 4.75 in23-4-06-0Back Band, 1.625 × 1.938 in23-4-05-0 x2Picture Mold, 0.813 × 2.75 in9-10-08-14Mantel, 1.5 × 5.375 in3-9-12-0BPlinth (Block), 1.25 × 6.5 in3-9-02-0 + 6-6-05-1Bar Rail, 1.75 × 3 in5-1-13-0BBrick Mold / Sill, 0.75 × 3.5 inTHREASHOLD2Nosing / Transitions / Thresholds, 0.75 × 4.5 in3-9-01-11/4 Round / 1/2 Round, 1 × 2.5 in6-4-06-1Corner Mold, 0.875 × 2.125 in3-6-02-0Panel, 1.75 × 3.625 in10-5-07-0Casing, 0.813 × 5 in2-8-01-9Crown / Cove, 0.75 × 5.25 in25-1-09-0ABase, 0.625 × 5 in10-6-11-0Base / Casing, 0.625 × 5.25 in3-3-02-0 + 3-6-09-0Hand Rail, 1.75 × 5.5 in

Good to know

How molding orders work

Many domestic or exotic hardwoods

Moldings are made in-house in whichever stocked hardwood you need, domestic or exotic. Please call about running moldings on material that you supply.

Setup per knife

We charge a molding setup for each knife used. Some profiles take more than one knife. Dimensional material has no setup charge.

Other sizes

Many of our knives can run on thicker, thinner, wider or narrower boards than shown. Call and we'll check whether yours will work.

Printing actual size

Open a profile and choose Print actual size. In your print settings, set scaling to 100% or Actual size, not Fit to page.