We will be closed November 26 to 29 for Thanksgiving.

248-887-1037
  1. Home
  2. Molding Library
  3. Casing

Casing moldings.

322 casing profiles from our library, with similar shapes side by side. Open one to see its knife numbers and print it actual size to hold against your trim.

Showing 48 of 322 casing profiles. Tap one to open it and print it actual size.

4-6-09-1Casing, 0.75 × 2.188 in4-7-12-1Casing, 0.75 × 2.25 in24-6-07-1Casing, 0.75 × 2.5 in24-3-04-1Casing, 0.75 × 2.688 in4-8-14-1Casing, 0.75 × 2.5 in24-7-12-1Casing, 0.75 × 2.75 in24-6-08-1Casing, 0.75 × 2.438 in24-6-09-1Casing, 0.688 × 2.313 in4-3-10-1Casing, 0.75 × 2.5 in24-5-10-1Casing, 0.75 × 2.75 in24-5-01-2Casing, 1 × 4.563 in24-5-03-1Casing, 0.813 × 3.5 in4-3-12-1Casing, 0.75 × 2.25 in24-5-09-1Casing, 0.813 × 2.875 in10-9-03-1Casing, 0.75 × 2.625 in24-6-06-1Casing, 0.688 × 3 in10-9-06-1Casing, 0.75 × 3.125 in24-7-11-1Casing, 0.75 × 3.25 in24-2-11-2Casing, 0.75 × 3.625 in4-4-02-1Casing, 0.75 × 3.5 in24-5-02-2Casing, 0.75 × 3.25 in4-9-14-1Casing, 0.813 × 3.375 in4-4-01-2Casing, 0.688 × 3.25 in6-1-07-1Casing, 0.75 × 2.625 in4-3-08-2Casing, 0.75 × 3.5 in25-7-02-1Casing, 1 × 3 in9-3-10-1Casing, 0.813 × 2.5 in5-10-07-1Casing, 1 × 3.25 in4-7-01-1Casing, 0.75 × 2.5 in10-1-01-1Casing, 0.813 × 2.75 in25-3-14-2Casing, 1 × 3.5 in25-7-12-1Casing, 0.688 × 2.75 in6-2-11-2Casing, 0.75 × 3 in4-6-01-2Casing, 0.75 × 3.313 in9-9-01-2Casing, 0.75 × 3.375 in29-8-01-2Casing, 0.75 × 3 in5-7-07-2Casing, 0.75 × 3.375 in7-3-09-1Casing, 0.875 × 3.375 in27-10-06-2Casing, 1.125 × 4.25 in5-9-06-1Casing, 0.75 × 3 in24-8-07-1Casing, 0.75 × 3.25 in26-9-05-2Casing, 0.875 × 3 in4-1-01-2Casing, 0.75 × 3.125 in4-2-01-2Casing, 0.75 × 3.188 in24-6-12-2Casing, 0.625 × 3.625 in10-8-10-2Casing, 0.5 × 2.75 in4-3-01-2Casing, 0.75 × 3.188 in24-3-03-2 + Bevel cutterCasing, 1.25 × 4.438 in

Good to know

How molding orders work

Many domestic or exotic hardwoods

Moldings are made in-house in whichever stocked hardwood you need, domestic or exotic. Please call about running moldings on material that you supply.

Setup per knife

We charge a molding setup for each knife used. Some profiles take more than one knife. Dimensional material has no setup charge.

Other sizes

Many of our knives can run on thicker, thinner, wider or narrower boards than shown. Call and we'll check whether yours will work.

Printing actual size

Open a profile and choose Print actual size. In your print settings, set scaling to 100% or Actual size, not Fit to page.