We will be closed November 26 to 29 for Thanksgiving.

248-887-1037
  1. Home
  2. Molding Library

2,068 molding profiles. One of them is probably yours.

Every knife we've had made stays in our library and is never reground to another shape. Find yours by type, width or knife number, open it, and print it actual size to hold against your trim.

Showing 48 of 2,068 profiles. Tap one to open it and print it actual size.

3-6-02-0 x2 + 3-5-06-0 x2Hand Rail, 2.5 × 6 in25-6-05-2Chair Rail, 0.625 × 3.5 in6-8-09-3Specialty Moldings, 1.063 × 4.063 in3-10-09-3Fluted / Beaded, 0.75 × 4.688 in6-1-01-2 + 3-9-14-0Picture Frame / Frames, 1.125 × 2.313 in7-3-10-2H + 3-3-02-0Mullion, 1 × 8 in3-5-05-5-0Tongue & Groove Paneling, 0.75 × 5 in29-4-03-0Back Band, 1.5 × 1.875 in23-5-05-0 + 24-1-08-0Picture Mold, 0.688 × 1.75 in28-4-01-2 + Angle CutterMantel, 2 × 5.5 in4-6-07-2BPlinth (Block), 1.25 × 8 in25-3-10-1Panel, 0.813 × 2.625 in6-8-06-2 + 3-6-12-0Casing, 0.75 × 5.25 in1-1-02-12Crown / Cove, 0.75 × 7.5 in23-2-08-0Base, 0.75 × 5 in7-4-08-1Base / Casing, 1.25 × 5 in10-8-09-0 + 9-4-07-0Hand Rail, 1.5 × 5.5 in7-6-05-3Chair Rail, 1.5 × 3.5 in10-10-08-4Specialty Moldings, 1.75 × 3.813 in3-3-15-0Fluted / Beaded, 0.75 × 4 in9-5-11-2BPicture Frame / Frames, 0.938 × 3.25 in7-3-10-2HB + 3-5-06-0Mullion, 1 × 8.75 in3-10-06-1BTongue & Groove Paneling, 1 × 5.25 in5-2-25-0Back Band, 1.25 × 1.5 in5-9-03-0Picture Mold, 0.75 × 1.75 in23-10-02-5Mantel, 1.5 × 4.875 in10-1-08-2BPlinth (Block), 1 × 7.5 in10-3-04-1Panel, 1.5 × 2.625 in8-8-12-0 x2 + 3-8-12-0 x2Casing, 0.75 × 5.25 in2-10-01-11Crown / Cove, 1 × 7.75 in5-5-12-0Base, 0.625 × 5.438 in8-7-07-3BBase / Casing, 0.75 × 3.125 in3-3-15-17 + 8-4-10-17Hand Rail, 2.25 × 4.25 in26-9-03-2Chair Rail, 0.75 × 3.5 in26-1-01-2Specialty Moldings, 1.125 × 3.625 in3-2-06-0CFluted / Beaded, 0.75 × 7.5 in7-7-04-3Picture Frame / Frames, 1.5 × 3.25 in5-2-21-0CMullion, 0.75 × 7.5 in3-9-07-1Tongue & Groove Paneling, 1 × 2.375 in25-9-18-0Back Band, 1.5 × 1.5 in25-4-14-0 + 5-8-03-0Picture Mold, 0.75 × 1.625 in7-7-02-4Mantel, 1.75 × 4.5 in5-5-09-1Plinth (Block), 1.75 × 8 in5-8-06-2Panel, 1.5 × 2.625 in26-6-06-1 + 5-1-27-0Casing, 0.813 × 5.125 in1-1-01-12Crown / Cove, 1 × 8.25 in8-3-07-0Base, 0.75 × 5 in24-3-08-2Base / Casing, 0.75 × 4.625 in

Good to know

How molding orders work

Many domestic or exotic hardwoods

Moldings are made in-house in whichever stocked hardwood you need, domestic or exotic. Please call about running moldings on material that you supply.

Setup per knife

We charge a molding setup for each knife used. Some profiles take more than one knife. Dimensional material has no setup charge.

Other sizes

Many of our knives can run on thicker, thinner, wider or narrower boards than shown. Call and we'll check whether yours will work.

Printing actual size

Open a profile and choose Print actual size. In your print settings, set scaling to 100% or Actual size, not Fit to page.